I need help with my Easycap

[hansch]

hello,
(I have Vista and ezcap)
http://img534.imageshack.us/img534/9554/51645518.jpg
yesterday I had in source: USB 2.0 Grabber<--then I got picture
but today I have syntek stk1150<---I don't get picture(Syntek stk1150 should be in the audio,I'll show it in just a sec)

and another problem, yesterday when I had picture, I didn't have audio
http://img42.imageshack.us/img42/5823/71522834.jpg
the audio device should be Syntek stk1150(as I mentioned b4), how can I get syntek there?

so HELPPPP!!!

Thanks...

[bigweeal]

Source:
It should state Syntek stk1150.


Audio:
It should not state Syntek stk1150. It should state USB (which it does)

Try unplugging your hp webcam and disable its driver. Reboot the pc.

[hansch]

ok it looks that I get sound, but with Vista I can't preview it, but with Windows7 can?
I still dont get video, in video source when it's syntek stk1150 but I get video, when there is USB 2.0 Grabber...how can I activate USB 2.0 Grabber in video source options?

[bigweeal]

Sorry, I can't help you. That's the problem with "easycaps". There are so many different manufacturers pumping them out you really do not know what you are getting. By that I mean, what chip is installed, what kind of IC and what firmware it is running.

I have never seen one that states "USB 2.0 Grabber" in video source options. Perhaps somebody else has and will be able to help.

[Leet15]

I have the same problem with audio..

Except my webcam is built into my laptop.

How do I fix that?

[bigweeal]

ok, i'm lost with this one. If your webcam is built into the laptop it would not be connected through the easycap.

[EasycapExpertti]

hello,
(I have Vista and ezcap)
http://img534.imageshack.us/img534/9554/51645518.jpg
yesterday I had in source: USB 2.0 Grabber<--then I got picture
but today I have syntek stk1150<---I don't get picture(Syntek stk1150 should be in the audio,I'll show it in just a sec)

and another problem, yesterday when I had picture, I didn't have audio
http://img42.imageshack.us/img42/5823/71522834.jpg
the audio device should be Syntek stk1150(as I mentioned b4), how can I get syntek there?

so HELPPPP!!!

Thanks...

Syntek STK1150 is fully workable only with Windows 2000 and Windows XP - so You should install newer video driver Syntek STK1160.
Download that driver from my support forum: http://adf.ly/1310198/capture-card-drivers

For Your audio problem You must first enable in use that Microphone (USB Audio Interface) and then enable also there that Preview Audio
setting, but first You must put Ulead to start in WinXP mode because there is a bug in Ulead and that Preview Audio setting doesn't stay
in memory. How to put Ulead to start in WinXP mode is said in my topic "Missing Audio" here: http://adf.ly/1310198/missing-audio